OpenCoverage

qprinter.cpp

Absolute File Name:/home/qt/qt5_coco/qt5/qtbase/src/printsupport/kernel/qprinter.cpp
Source codeSwitch to Preprocessed file
LineSourceCount
1/****************************************************************************-
2**-
3** Copyright (C) 2016 The Qt Company Ltd.-
4** Contact: https://www.qt.io/licensing/-
5**-
6** This file is part of the QtGui module of the Qt Toolkit.-
7**-
8** $QT_BEGIN_LICENSE:LGPL$-
9** Commercial License Usage-
10** Licensees holding valid commercial Qt licenses may use this file in-
11** accordance with the commercial license agreement provided with the-
12** Software or, alternatively, in accordance with the terms contained in-
13** a written agreement between you and The Qt Company. For licensing terms-
14** and conditions see https://www.qt.io/terms-conditions. For further-
15** information use the contact form at https://www.qt.io/contact-us.-
16**-
17** GNU Lesser General Public License Usage-
18** Alternatively, this file may be used under the terms of the GNU Lesser-
19** General Public License version 3 as published by the Free Software-
20** Foundation and appearing in the file LICENSE.LGPL3 included in the-
21** packaging of this file. Please review the following information to-
22** ensure the GNU Lesser General Public License version 3 requirements-
23** will be met: https://www.gnu.org/licenses/lgpl-3.0.html.-
24**-
25** GNU General Public License Usage-
26** Alternatively, this file may be used under the terms of the GNU-
27** General Public License version 2.0 or (at your option) the GNU General-
28** Public license version 3 or any later version approved by the KDE Free-
29** Qt Foundation. The licenses are as published by the Free Software-
30** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3-
31** included in the packaging of this file. Please review the following-
32** information to ensure the GNU General Public License requirements will-
33** be met: https://www.gnu.org/licenses/gpl-2.0.html and-
34** https://www.gnu.org/licenses/gpl-3.0.html.-
35**-
36** $QT_END_LICENSE$-
37**-
38****************************************************************************/-
39-
40#include "qprinter.h"-
41#include "qprinter_p.h"-
42-
43#ifndef QT_NO_PRINTER-
44-
45#include <qpa/qplatformprintplugin.h>-
46#include <qpa/qplatformprintersupport.h>-
47-
48#include "qprintengine.h"-
49#include "qlist.h"-
50#include <qcoreapplication.h>-
51#include <qfileinfo.h>-
52-
53#include <private/qpagedpaintdevice_p.h>-
54-
55#include "qprintengine_pdf_p.h"-
56-
57#include <qpicture.h>-
58#include <private/qpaintengine_preview_p.h>-
59-
60QT_BEGIN_NAMESPACE-
61-
62#define ABORT_IF_ACTIVE(location) \-
63 if (d->printEngine->printerState() == QPrinter::Active) { \-
64 qWarning("%s: Cannot be changed while printer is active", location); \-
65 return; \-
66 }-
67-
68#define ABORT_IF_ACTIVE_RETURN(location, retValue) \-
69 if (d->printEngine->printerState() == QPrinter::Active) { \-
70 qWarning("%s: Cannot be changed while printer is active", location); \-
71 return retValue; \-
72 }-
73-
74extern qreal qt_pixelMultiplier(int resolution);-
75extern QMarginsF qt_convertMargins(const QMarginsF &margins, QPageLayout::Unit fromUnits, QPageLayout::Unit toUnits);-
76-
77/// return the multiplier of converting from the unit value to postscript-points.-
78Q_PRINTSUPPORT_EXPORT double qt_multiplierForUnit(QPrinter::Unit unit, int resolution)-
79{-
80 switch(unit) {-
81 case QPrinter::Millimeter:
never executed: case QPrinter::Millimeter:
0
82 return 2.83464566929;
never executed: return 2.83464566929;
0
83 case QPrinter::Point:
never executed: case QPrinter::Point:
0
84 return 1.0;
never executed: return 1.0;
0
85 case QPrinter::Inch:
never executed: case QPrinter::Inch:
0
86 return 72.0;
never executed: return 72.0;
0
87 case QPrinter::Pica:
never executed: case QPrinter::Pica:
0
88 return 12;
never executed: return 12;
0
89 case QPrinter::Didot:
never executed: case QPrinter::Didot:
0
90 return 1.065826771;
never executed: return 1.065826771;
0
91 case QPrinter::Cicero:
never executed: case QPrinter::Cicero:
0
92 return 12.789921252;
never executed: return 12.789921252;
0
93 case QPrinter::DevicePixel:
never executed: case QPrinter::DevicePixel:
0
94 return 72.0/resolution;
never executed: return 72.0/resolution;
0
95 }-
96 return 1.0;
never executed: return 1.0;
0
97}-
98-
99// not static: it's needed in qpagesetupdialog_unix.cpp-
100Q_PRINTSUPPORT_EXPORT QSizeF qt_printerPaperSize(QPrinter::Orientation orientation,-
101 QPrinter::PaperSize paperSize,-
102 QPrinter::Unit unit,-
103 int resolution)-
104{-
105 QPageSize pageSize = QPageSize(QPageSize::PageSizeId(paperSize));-
106 QSizeF sizef;-
107 if (unit == QPrinter::DevicePixel)
unit == QPrinter::DevicePixelDescription
TRUEnever evaluated
FALSEnever evaluated
0
108 sizef = pageSize.size(QPageSize::Point) * qt_multiplierForUnit(unit, resolution);
never executed: sizef = pageSize.size(QPageSize::Point) * qt_multiplierForUnit(unit, resolution);
0
109 else-
110 sizef = pageSize.size(QPageSize::Unit(unit));
never executed: sizef = pageSize.size(QPageSize::Unit(unit));
0
111 return orientation == QPrinter::Landscape ? sizef.transposed() : sizef;
never executed: return orientation == QPrinter::Landscape ? sizef.transposed() : sizef;
0
112}-
113-
114QPrinterInfo QPrinterPrivate::findValidPrinter(const QPrinterInfo &printer)-
115{-
116 // Try find a valid printer to use, either the one given, the default or the first available-
117 QPrinterInfo printerToUse = printer;-
118 if (printerToUse.isNull()) {
printerToUse.isNull()Description
TRUEevaluated 134 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
FALSEnever evaluated
0-134
119 printerToUse = QPrinterInfo::defaultPrinter();-
120 if (printerToUse.isNull()) {
printerToUse.isNull()Description
TRUEevaluated 134 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
FALSEnever evaluated
0-134
121 QStringList availablePrinterNames = QPrinterInfo::availablePrinterNames();-
122 if (!availablePrinterNames.isEmpty())
!availablePrin...ames.isEmpty()Description
TRUEnever evaluated
FALSEevaluated 134 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
0-134
123 printerToUse = QPrinterInfo::printerInfo(availablePrinterNames.at(0));
never executed: printerToUse = QPrinterInfo::printerInfo(availablePrinterNames.at(0));
0
124 }
executed 134 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
134
125 }
executed 134 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
134
126 return printerToUse;
executed 134 times by 2 tests: return printerToUse;
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
134
127}-
128-
129void QPrinterPrivate::initEngines(QPrinter::OutputFormat format, const QPrinterInfo &printer)-
130{-
131 // Default to PdfFormat-
132 outputFormat = QPrinter::PdfFormat;-
133 QPlatformPrinterSupport *ps = 0;-
134 QString printerName;-
135-
136 // Only set NativeFormat if we have a valid plugin and printer to use-
137 if (format == QPrinter::NativeFormat) {
format == QPri...::NativeFormatDescription
TRUEevaluated 128 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
FALSEnever evaluated
0-128
138 ps = QPlatformPrinterSupportPlugin::get();-
139 QPrinterInfo printerToUse = findValidPrinter(printer);-
140 if (ps && !printerToUse.isNull()) {
psDescription
TRUEevaluated 128 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
FALSEnever evaluated
!printerToUse.isNull()Description
TRUEnever evaluated
FALSEevaluated 128 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
0-128
141 outputFormat = QPrinter::NativeFormat;-
142 printerName = printerToUse.printerName();-
143 }
never executed: end of block
0
144 }
executed 128 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
145-
146 if (outputFormat == QPrinter::NativeFormat) {
outputFormat =...::NativeFormatDescription
TRUEnever evaluated
FALSEevaluated 128 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
0-128
147 printEngine = ps->createNativePrintEngine(printerMode);-
148 paintEngine = ps->createPaintEngine(printEngine, printerMode);-
149 } else {
never executed: end of block
0
150 QPdfPrintEngine *pdfEngine = new QPdfPrintEngine(printerMode);-
151 paintEngine = pdfEngine;-
152 printEngine = pdfEngine;-
153 }
executed 128 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
154-
155 use_default_engine = true;-
156 had_default_engines = true;-
157 setProperty(QPrintEngine::PPK_PrinterName, printerName);-
158 validPrinter = true;-
159}
executed 128 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
160-
161void QPrinterPrivate::changeEngines(QPrinter::OutputFormat format, const QPrinterInfo &printer)-
162{-
163 QPrintEngine *oldPrintEngine = printEngine;-
164 const bool def_engine = use_default_engine;-
165-
166 initEngines(format, printer);-
167-
168 if (oldPrintEngine) {
oldPrintEngineDescription
TRUEnever evaluated
FALSEnever evaluated
0
169 const auto properties = m_properties; // take a copy: setProperty() below modifies m_properties-
170 for (const auto &key : properties) {-
171 QVariant prop;-
172 // PPK_NumberOfCopies need special treatmeant since it in most cases-
173 // will return 1, disregarding the actual value that was set-
174 // PPK_PrinterName also needs special treatment as initEngines has set it already-
175 if (key == QPrintEngine::PPK_NumberOfCopies)
key == QPrintE...NumberOfCopiesDescription
TRUEnever evaluated
FALSEnever evaluated
0
176 prop = QVariant(q_ptr->copyCount());
never executed: prop = QVariant(q_ptr->copyCount());
0
177 else if (key != QPrintEngine::PPK_PrinterName)
key != QPrintE...PK_PrinterNameDescription
TRUEnever evaluated
FALSEnever evaluated
0
178 prop = oldPrintEngine->property(key);
never executed: prop = oldPrintEngine->property(key);
0
179 if (prop.isValid())
prop.isValid()Description
TRUEnever evaluated
FALSEnever evaluated
0
180 setProperty(key, prop);
never executed: setProperty(key, prop);
0
181 }
never executed: end of block
0
182 }
never executed: end of block
0
183-
184 if (def_engine)
def_engineDescription
TRUEnever evaluated
FALSEnever evaluated
0
185 delete oldPrintEngine;
never executed: delete oldPrintEngine;
0
186}
never executed: end of block
0
187-
188#ifndef QT_NO_PRINTPREVIEWWIDGET-
189QList<const QPicture *> QPrinterPrivate::previewPages() const-
190{-
191 if (previewEngine)
previewEngineDescription
TRUEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-1
192 return previewEngine->pages();
executed 1 time by 1 test: return previewEngine->pages();
Executed by:
  • tst_QPrinter
1
193 return QList<const QPicture *>();
never executed: return QList<const QPicture *>();
0
194}-
195-
196void QPrinterPrivate::setPreviewMode(bool enable)-
197{-
198 Q_Q(QPrinter);-
199 if (enable) {
enableDescription
TRUEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
1
200 if (!previewEngine)
!previewEngineDescription
TRUEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-1
201 previewEngine = new QPreviewPaintEngine;
executed 1 time by 1 test: previewEngine = new QPreviewPaintEngine;
Executed by:
  • tst_QPrinter
1
202 had_default_engines = use_default_engine;-
203 use_default_engine = false;-
204 realPrintEngine = printEngine;-
205 realPaintEngine = paintEngine;-
206 q->setEngines(previewEngine, previewEngine);-
207 previewEngine->setProxyEngines(realPrintEngine, realPaintEngine);-
208 } else {
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
209 q->setEngines(realPrintEngine, realPaintEngine);-
210 use_default_engine = had_default_engines;-
211 }
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
212}-
213#endif // QT_NO_PRINTPREVIEWWIDGET-
214-
215void QPrinterPrivate::setProperty(QPrintEngine::PrintEnginePropertyKey key, const QVariant &value)-
216{-
217 printEngine->setProperty(key, value);-
218 m_properties.insert(key);-
219}
executed 336 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
336
220-
221-
222class QPrinterPagedPaintDevicePrivate : public QPagedPaintDevicePrivate-
223{-
224public:-
225 QPrinterPagedPaintDevicePrivate(QPrinterPrivate *d)-
226 : QPagedPaintDevicePrivate(), pd(d)-
227 {}
executed 128 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
228-
229 virtual ~QPrinterPagedPaintDevicePrivate()-
230 {}-
231-
232 bool setPageLayout(const QPageLayout &newPageLayout) Q_DECL_OVERRIDE-
233 {-
234 if (pd->paintEngine->type() != QPaintEngine::Pdf
pd->paintEngin...intEngine::PdfDescription
TRUEnever evaluated
FALSEnever evaluated
0
235 && pd->printEngine->printerState() == QPrinter::Active) {
pd->printEngin...rinter::ActiveDescription
TRUEnever evaluated
FALSEnever evaluated
0
236 qWarning("QPrinter::setPageLayout: Cannot be changed while printer is active");-
237 return false;
never executed: return false;
0
238 }-
239-
240 // Try to set the print engine page layout-
241 pd->setProperty(QPrintEngine::PPK_QPageLayout, QVariant::fromValue(newPageLayout));-
242-
243 // Set QPagedPaintDevice layout to match the current print engine value-
244 m_pageLayout = pageLayout();-
245-
246 return pageLayout().isEquivalentTo(newPageLayout);
never executed: return pageLayout().isEquivalentTo(newPageLayout);
0
247 }-
248-
249 bool setPageSize(const QPageSize &pageSize) Q_DECL_OVERRIDE-
250 {-
251 if (pd->paintEngine->type() != QPaintEngine::Pdf
pd->paintEngin...intEngine::PdfDescription
TRUEnever evaluated
FALSEevaluated 47 times by 1 test
Evaluated by:
  • tst_QPrinter
0-47
252 && pd->printEngine->printerState() == QPrinter::Active) {
pd->printEngin...rinter::ActiveDescription
TRUEnever evaluated
FALSEnever evaluated
0
253 qWarning("QPrinter::setPageLayout: Cannot be changed while printer is active");-
254 return false;
never executed: return false;
0
255 }-
256-
257-
258 // Try to set the print engine page size-
259 pd->setProperty(QPrintEngine::PPK_QPageSize, QVariant::fromValue(pageSize));-
260-
261 // Set QPagedPaintDevice layout to match the current print engine value-
262 m_pageLayout = pageLayout();-
263-
264 return pageLayout().pageSize().isEquivalentTo(pageSize);
executed 47 times by 1 test: return pageLayout().pageSize().isEquivalentTo(pageSize);
Executed by:
  • tst_QPrinter
47
265 }-
266-
267 bool setPageOrientation(QPageLayout::Orientation orientation) Q_DECL_OVERRIDE-
268 {-
269 // Set the print engine value-
270 pd->setProperty(QPrintEngine::PPK_Orientation, orientation);-
271-
272 // Set QPagedPaintDevice layout to match the current print engine value-
273 m_pageLayout = pageLayout();-
274-
275 return pageLayout().orientation() == orientation;
executed 48 times by 1 test: return pageLayout().orientation() == orientation;
Executed by:
  • tst_QPrinter
48
276 }-
277-
278 bool setPageMargins(const QMarginsF &margins) Q_DECL_OVERRIDE-
279 {-
280 return setPageMargins(margins, pageLayout().units());
never executed: return setPageMargins(margins, pageLayout().units());
0
281 }-
282-
283 bool setPageMargins(const QMarginsF &margins, QPageLayout::Unit units) Q_DECL_OVERRIDE-
284 {-
285 // Try to set print engine margins-
286 QPair<QMarginsF, QPageLayout::Unit> pair = qMakePair(margins, units);-
287 pd->setProperty(QPrintEngine::PPK_QPageMargins, QVariant::fromValue(pair));-
288-
289 // Set QPagedPaintDevice layout to match the current print engine value-
290 m_pageLayout = pageLayout();-
291-
292 return pageLayout().margins() == margins && pageLayout().units() == units;
executed 13 times by 1 test: return pageLayout().margins() == margins && pageLayout().units() == units;
Executed by:
  • tst_QPrinter
13
293 }-
294-
295 QPageLayout pageLayout() const Q_DECL_OVERRIDE-
296 {-
297 return pd->printEngine->property(QPrintEngine::PPK_QPageLayout).value<QPageLayout>();
executed 462 times by 1 test: return pd->printEngine->property(QPrintEngine::PPK_QPageLayout).value<QPageLayout>();
Executed by:
  • tst_QPrinter
462
298 }-
299-
300 QPrinterPrivate *pd;-
301};-
302-
303-
304/*!-
305 \class QPrinter-
306 \reentrant-
307-
308 \brief The QPrinter class is a paint device that paints on a printer.-
309-
310 \ingroup printing-
311 \inmodule QtPrintSupport-
312-
313-
314 This device represents a series of pages of printed output, and is-
315 used in almost exactly the same way as other paint devices such as-
316 QWidget and QPixmap.-
317 A set of additional functions are provided to manage device-specific-
318 features, such as orientation and resolution, and to step through-
319 the pages in a document as it is generated.-
320-
321 When printing directly to a printer on Windows or \macos, QPrinter uses-
322 the built-in printer drivers. On X11, QPrinter uses the-
323 \l{Common Unix Printing System (CUPS)}-
324 to send PDF output to the printer. As an alternative,-
325 the printProgram() function can be used to specify the command or utility-
326 to use instead of the system default.-
327-
328 Note that setting parameters like paper size and resolution on an-
329 invalid printer is undefined. You can use QPrinter::isValid() to-
330 verify this before changing any parameters.-
331-
332 QPrinter supports a number of parameters, most of which can be-
333 changed by the end user through a \l{QPrintDialog}{print dialog}. In-
334 general, QPrinter passes these functions onto the underlying QPrintEngine.-
335-
336 The most important parameters are:-
337 \list-
338 \li setOrientation() tells QPrinter which page orientation to use.-
339 \li setPaperSize() tells QPrinter what paper size to expect from the-
340 printer.-
341 \li setResolution() tells QPrinter what resolution you wish the-
342 printer to provide, in dots per inch (DPI).-
343 \li setFullPage() tells QPrinter whether you want to deal with the-
344 full page or just with the part the printer can draw on.-
345 \li setCopyCount() tells QPrinter how many copies of the document-
346 it should print.-
347 \endlist-
348-
349 Many of these functions can only be called before the actual printing-
350 begins (i.e., before QPainter::begin() is called). This usually makes-
351 sense because, for example, it's not possible to change the number of-
352 copies when you are halfway through printing. There are also some-
353 settings that the user sets (through the printer dialog) and that-
354 applications are expected to obey. See QAbstractPrintDialog's-
355 documentation for more details.-
356-
357 When QPainter::begin() is called, the QPrinter it operates on is prepared for-
358 a new page, enabling the QPainter to be used immediately to paint the first-
359 page in a document. Once the first page has been painted, newPage() can be-
360 called to request a new blank page to paint on, or QPainter::end() can be-
361 called to finish printing. The second page and all following pages are-
362 prepared using a call to newPage() before they are painted.-
363-
364 The first page in a document does not need to be preceded by a call to-
365 newPage(). You only need to calling newPage() after QPainter::begin() if you-
366 need to insert a blank page at the beginning of a printed document.-
367 Similarly, calling newPage() after the last page in a document is painted will-
368 result in a trailing blank page appended to the end of the printed document.-
369-
370 If you want to abort the print job, abort() will try its best to-
371 stop printing. It may cancel the entire job or just part of it.-
372-
373 Since QPrinter can print to any QPrintEngine subclass, it is possible to-
374 extend printing support to cover new types of printing subsystem by-
375 subclassing QPrintEngine and reimplementing its interface.-
376-
377 \sa QPrintDialog, {Qt Print Support}-
378*/-
379-
380/*!-
381 \enum QPrinter::PrinterState-
382-
383 \value Idle-
384 \value Active-
385 \value Aborted-
386 \value Error-
387*/-
388-
389/*!-
390 \enum QPrinter::PrinterMode-
391-
392 This enum describes the mode the printer should work in. It-
393 basically presets a certain resolution and working mode.-
394-
395 \value ScreenResolution Sets the resolution of the print device to-
396 the screen resolution. This has the big advantage that the results-
397 obtained when painting on the printer will match more or less-
398 exactly the visible output on the screen. It is the easiest to-
399 use, as font metrics on the screen and on the printer are the-
400 same. This is the default value. ScreenResolution will produce a-
401 lower quality output than HighResolution and should only be used-
402 for drafts.-
403-
404 \value PrinterResolution This value is deprecated. It is-
405 equivalent to ScreenResolution on Unix and HighResolution on-
406 Windows and Mac. Due to the difference between ScreenResolution-
407 and HighResolution, use of this value may lead to non-portable-
408 printer code.-
409-
410 \value HighResolution On Windows, sets the printer resolution to that-
411 defined for the printer in use. For PDF printing, sets the-
412 resolution of the PDF driver to 1200 dpi.-
413-
414 \note When rendering text on a QPrinter device, it is important-
415 to realize that the size of text, when specified in points, is-
416 independent of the resolution specified for the device itself.-
417 Therefore, it may be useful to specify the font size in pixels-
418 when combining text with graphics to ensure that their relative-
419 sizes are what you expect.-
420*/-
421-
422/*!-
423 \enum QPrinter::Orientation-
424-
425 This enum type (not to be confused with \c Orientation) is used-
426 to specify each page's orientation.-
427-
428 \value Portrait the page's height is greater than its width.-
429-
430 \value Landscape the page's width is greater than its height.-
431-
432 This type interacts with \l QPrinter::PaperSize and-
433 QPrinter::setFullPage() to determine the final size of the page-
434 available to the application.-
435*/-
436-
437-
438/*!-
439 \enum QPrinter::PrintRange-
440-
441 Used to specify the print range selection option.-
442-
443 \value AllPages All pages should be printed.-
444 \value Selection Only the selection should be printed.-
445 \value PageRange The specified page range should be printed.-
446 \value CurrentPage Only the current page should be printed.-
447-
448 \sa setPrintRange(), printRange(), QAbstractPrintDialog::PrintRange-
449*/-
450-
451/*!-
452 \enum QPrinter::PaperSize-
453 \since 4.4-
454-
455 This enum type specifies what paper size QPrinter should use.-
456 QPrinter does not check that the paper size is available; it just-
457 uses this information, together with QPrinter::Orientation and-
458 QPrinter::setFullPage(), to determine the printable area.-
459-
460 The defined sizes (with setFullPage(true)) are:-
461-
462 \value A0 841 x 1189 mm-
463 \value A1 594 x 841 mm-
464 \value A2 420 x 594 mm-
465 \value A3 297 x 420 mm-
466 \value A4 210 x 297 mm, 8.26 x 11.69 inches-
467 \value A5 148 x 210 mm-
468 \value A6 105 x 148 mm-
469 \value A7 74 x 105 mm-
470 \value A8 52 x 74 mm-
471 \value A9 37 x 52 mm-
472 \value B0 1000 x 1414 mm-
473 \value B1 707 x 1000 mm-
474 \value B2 500 x 707 mm-
475 \value B3 353 x 500 mm-
476 \value B4 250 x 353 mm-
477 \value B5 176 x 250 mm, 6.93 x 9.84 inches-
478 \value B6 125 x 176 mm-
479 \value B7 88 x 125 mm-
480 \value B8 62 x 88 mm-
481 \value B9 33 x 62 mm-
482 \value B10 31 x 44 mm-
483 \value C5E 163 x 229 mm-
484 \value Comm10E 105 x 241 mm, U.S. Common 10 Envelope-
485 \value DLE 110 x 220 mm-
486 \value Executive 7.5 x 10 inches, 190.5 x 254 mm-
487 \value Folio 210 x 330 mm-
488 \value Ledger 431.8 x 279.4 mm-
489 \value Legal 8.5 x 14 inches, 215.9 x 355.6 mm-
490 \value Letter 8.5 x 11 inches, 215.9 x 279.4 mm-
491 \value Tabloid 279.4 x 431.8 mm-
492 \value Custom Unknown, or a user defined size.-
493 \value A10-
494 \value A3Extra-
495 \value A4Extra-
496 \value A4Plus-
497 \value A4Small-
498 \value A5Extra-
499 \value B5Extra-
500 \value JisB0-
501 \value JisB1-
502 \value JisB2-
503 \value JisB3-
504 \value JisB4-
505 \value JisB5-
506 \value JisB6,-
507 \value JisB7-
508 \value JisB8-
509 \value JisB9-
510 \value JisB10-
511 \value AnsiA = Letter-
512 \value AnsiB = Ledger-
513 \value AnsiC-
514 \value AnsiD-
515 \value AnsiE-
516 \value LegalExtra-
517 \value LetterExtra-
518 \value LetterPlus-
519 \value LetterSmall-
520 \value TabloidExtra-
521 \value ArchA-
522 \value ArchB-
523 \value ArchC-
524 \value ArchD-
525 \value ArchE-
526 \value Imperial7x9-
527 \value Imperial8x10-
528 \value Imperial9x11-
529 \value Imperial9x12-
530 \value Imperial10x11-
531 \value Imperial10x13-
532 \value Imperial10x14-
533 \value Imperial12x11-
534 \value Imperial15x11-
535 \value ExecutiveStandard-
536 \value Note-
537 \value Quarto-
538 \value Statement-
539 \value SuperA-
540 \value SuperB-
541 \value Postcard-
542 \value DoublePostcard-
543 \value Prc16K-
544 \value Prc32K-
545 \value Prc32KBig-
546 \value FanFoldUS-
547 \value FanFoldGerman-
548 \value FanFoldGermanLegal-
549 \value EnvelopeB4-
550 \value EnvelopeB5-
551 \value EnvelopeB6-
552 \value EnvelopeC0-
553 \value EnvelopeC1-
554 \value EnvelopeC2-
555 \value EnvelopeC3-
556 \value EnvelopeC4-
557 \value EnvelopeC5 = C5E-
558 \value EnvelopeC6-
559 \value EnvelopeC65-
560 \value EnvelopeC7-
561 \value EnvelopeDL = DLE-
562 \value Envelope9-
563 \value Envelope10 = Comm10E-
564 \value Envelope11-
565 \value Envelope12-
566 \value Envelope14-
567 \value EnvelopeMonarch-
568 \value EnvelopePersonal-
569 \value EnvelopeChou3-
570 \value EnvelopeChou4-
571 \value EnvelopeInvite-
572 \value EnvelopeItalian-
573 \value EnvelopeKaku2-
574 \value EnvelopeKaku3-
575 \value EnvelopePrc1-
576 \value EnvelopePrc2-
577 \value EnvelopePrc3-
578 \value EnvelopePrc4-
579 \value EnvelopePrc5-
580 \value EnvelopePrc6-
581 \value EnvelopePrc7-
582 \value EnvelopePrc8-
583 \value EnvelopePrc9-
584 \value EnvelopePrc10-
585 \value EnvelopeYou4-
586 \value LastPageSize = EnvelopeYou4-
587 \omitvalue NPageSize-
588 \omitvalue NPaperSize-
589-
590 With setFullPage(false) (the default), the metrics will be a bit-
591 smaller; how much depends on the printer in use.-
592-
593 Due to historic reasons QPageSize::Executive is not the same as the standard-
594 Postscript and Windows Executive size, use QPageSize::ExecutiveStandard instead.-
595-
596 The Postscript standard size QPageSize::Folio is different to the Windows-
597 DMPAPER_FOLIO size, use the Postscript standard size QPageSize::FanFoldGermanLegal-
598 if needed.-
599*/-
600-
601-
602/*!-
603 \enum QPrinter::PageOrder-
604-
605 This enum type is used by QPrinter to tell the application program-
606 how to print.-
607-
608 \value FirstPageFirst the lowest-numbered page should be printed-
609 first.-
610-
611 \value LastPageFirst the highest-numbered page should be printed-
612 first.-
613*/-
614-
615/*!-
616 \enum QPrinter::ColorMode-
617-
618 This enum type is used to indicate whether QPrinter should print-
619 in color or not.-
620-
621 \value Color print in color if available, otherwise in grayscale.-
622-
623 \value GrayScale print in grayscale, even on color printers.-
624*/-
625-
626/*!-
627 \enum QPrinter::PaperSource-
628-
629 This enum type specifies what paper source QPrinter is to use.-
630 QPrinter does not check that the paper source is available; it-
631 just uses this information to try and set the paper source.-
632 Whether it will set the paper source depends on whether the-
633 printer has that particular source.-
634-
635 \warning This is currently only implemented for Windows.-
636-
637 \value Auto-
638 \value Cassette-
639 \value Envelope-
640 \value EnvelopeManual-
641 \value FormSource-
642 \value LargeCapacity-
643 \value LargeFormat-
644 \value Lower-
645 \value MaxPageSource Deprecated, use LastPaperSource instead-
646 \value Middle-
647 \value Manual-
648 \value OnlyOne-
649 \value Tractor-
650 \value SmallFormat-
651 \value Upper-
652 \value CustomSource A PaperSource defined by the printer that is unknown to Qt-
653 \value LastPaperSource The highest valid PaperSource value, currently CustomSource-
654*/-
655-
656/*!-
657 \enum QPrinter::Unit-
658 \since 4.4-
659-
660 This enum type is used to specify the measurement unit for page and-
661 paper sizes.-
662-
663 \value Millimeter-
664 \value Point-
665 \value Inch-
666 \value Pica-
667 \value Didot-
668 \value Cicero-
669 \value DevicePixel-
670-
671 Note the difference between Point and DevicePixel. The Point unit is-
672 defined to be 1/72th of an inch, while the DevicePixel unit is-
673 resolution dependant and is based on the actual pixels, or dots, on-
674 the printer.-
675*/-
676-
677/*!-
678 Creates a new printer object with the given \a mode.-
679*/-
680QPrinter::QPrinter(PrinterMode mode)-
681 : QPagedPaintDevice(),-
682 d_ptr(new QPrinterPrivate(this))-
683{-
684 delete d;-
685 d = new QPrinterPagedPaintDevicePrivate(d_func());-
686 d_ptr->init(QPrinterInfo(), mode);-
687}
executed 128 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
688-
689/*!-
690 \since 4.4-
691-
692 Creates a new printer object with the given \a printer and \a mode.-
693*/-
694QPrinter::QPrinter(const QPrinterInfo& printer, PrinterMode mode)-
695 : QPagedPaintDevice(),-
696 d_ptr(new QPrinterPrivate(this))-
697{-
698 delete d;-
699 d = new QPrinterPagedPaintDevicePrivate(d_func());-
700 d_ptr->init(printer, mode);-
701}
never executed: end of block
0
702-
703void QPrinterPrivate::init(const QPrinterInfo &printer, QPrinter::PrinterMode mode)-
704{-
705 if (Q_UNLIKELY(!QCoreApplication::instance())) {
__builtin_expe...nce()), false)Description
TRUEnever evaluated
FALSEevaluated 128 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
0-128
706 qFatal("QPrinter: Must construct a QCoreApplication before a QPrinter");-
707 return;
never executed: return;
0
708 }-
709-
710 printerMode = mode;-
711-
712 initEngines(QPrinter::NativeFormat, printer);-
713}
executed 128 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
714-
715/*!-
716 This function is used by subclasses of QPrinter to specify custom-
717 print and paint engines (\a printEngine and \a paintEngine,-
718 respectively).-
719-
720 QPrinter does not take ownership of the engines, so you need to-
721 manage these engine instances yourself.-
722-
723 Note that changing the engines will reset the printer state and-
724 all its properties.-
725-
726 \sa printEngine(), paintEngine(), setOutputFormat()-
727-
728 \since 4.1-
729*/-
730void QPrinter::setEngines(QPrintEngine *printEngine, QPaintEngine *paintEngine)-
731{-
732 Q_D(QPrinter);-
733-
734 if (d->use_default_engine)
d->use_default_engineDescription
TRUEnever evaluated
FALSEevaluated 2 times by 1 test
Evaluated by:
  • tst_QPrinter
0-2
735 delete d->printEngine;
never executed: delete d->printEngine;
0
736-
737 d->printEngine = printEngine;-
738 d->paintEngine = paintEngine;-
739 d->use_default_engine = false;-
740}
executed 2 times by 1 test: end of block
Executed by:
  • tst_QPrinter
2
741-
742/*!-
743 Destroys the printer object and frees any allocated resources. If-
744 the printer is destroyed while a print job is in progress this may-
745 or may not affect the print job.-
746*/-
747QPrinter::~QPrinter()-
748{-
749 Q_D(QPrinter);-
750 if (d->use_default_engine)
d->use_default_engineDescription
TRUEevaluated 128 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
FALSEnever evaluated
0-128
751 delete d->printEngine;
executed 128 times by 2 tests: delete d->printEngine;
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
752#ifndef QT_NO_PRINTPREVIEWWIDGET-
753 delete d->previewEngine;-
754#endif-
755}
executed 128 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
128
756-
757/*!-
758 \enum QPrinter::OutputFormat-
759-
760 The OutputFormat enum is used to describe the format QPrinter should-
761 use for printing.-
762-
763 \value NativeFormat QPrinter will print output using a method defined-
764 by the platform it is running on. This mode is the default when printing-
765 directly to a printer.-
766-
767 \value PdfFormat QPrinter will generate its output as a searchable PDF file.-
768 This mode is the default when printing to a file.-
769-
770 \sa outputFormat(), setOutputFormat(), setOutputFileName()-
771*/-
772-
773/*!-
774 \since 4.1-
775-
776 Sets the output format for this printer to \a format.-
777-
778 If \a format is the same value as currently set then no change will be made.-
779-
780 If \a format is NativeFormat then the printerName will be set to the default-
781 printer. If there are no valid printers configured then no change will be made.-
782 If you want to set NativeFormat with a specific printerName then use-
783 setPrinterName().-
784-
785 \sa setPrinterName()-
786*/-
787void QPrinter::setOutputFormat(OutputFormat format)-
788{-
789 Q_D(QPrinter);-
790-
791 if (d->outputFormat == format)
d->outputFormat == formatDescription
TRUEevaluated 40 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEevaluated 6 times by 1 test
Evaluated by:
  • tst_QPrinter
6-40
792 return;
executed 40 times by 1 test: return;
Executed by:
  • tst_QPrinter
40
793-
794 if (format == QPrinter::NativeFormat) {
format == QPri...::NativeFormatDescription
TRUEevaluated 6 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-6
795 QPrinterInfo printerToUse = d->findValidPrinter();-
796 if (!printerToUse.isNull())
!printerToUse.isNull()Description
TRUEnever evaluated
FALSEevaluated 6 times by 1 test
Evaluated by:
  • tst_QPrinter
0-6
797 d->changeEngines(format, printerToUse);
never executed: d->changeEngines(format, printerToUse);
0
798 } else {
executed 6 times by 1 test: end of block
Executed by:
  • tst_QPrinter
6
799 d->changeEngines(format, QPrinterInfo());-
800 }
never executed: end of block
0
801}-
802-
803/*!-
804 \since 4.1-
805-
806 Returns the output format for this printer.-
807*/-
808QPrinter::OutputFormat QPrinter::outputFormat() const-
809{-
810 Q_D(const QPrinter);-
811 return d->outputFormat;
executed 48 times by 1 test: return d->outputFormat;
Executed by:
  • tst_QPrinter
48
812}-
813-
814-
815-
816/*! \internal-
817*/-
818int QPrinter::devType() const-
819{-
820 return QInternal::Printer;
executed 108 times by 1 test: return QInternal::Printer;
Executed by:
  • tst_QPrinter
108
821}-
822-
823/*!-
824 Returns the printer name. This value is initially set to the name-
825 of the default printer.-
826-
827 \sa setPrinterName()-
828*/-
829QString QPrinter::printerName() const-
830{-
831 Q_D(const QPrinter);-
832 return d->printEngine->property(QPrintEngine::PPK_PrinterName).toString();
executed 15 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_PrinterName).toString();
Executed by:
  • tst_QPrinter
15
833}-
834-
835/*!-
836 Sets the printer name to \a name.-
837-
838 If the \a name is empty then the output format will be set to PdfFormat.-
839-
840 If the \a name is not a valid printer then no change will be made.-
841-
842 If the \a name is a valid printer then the output format will be set to NativeFormat.-
843-
844 \sa printerName(), isValid(), setOutputFormat()-
845*/-
846void QPrinter::setPrinterName(const QString &name)-
847{-
848 Q_D(QPrinter);-
849 ABORT_IF_ACTIVE("QPrinter::setPrinterName");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 5 times by 1 test
Evaluated by:
  • tst_QPrinter
0-5
850-
851 if (printerName() == name)
printerName() == nameDescription
TRUEevaluated 4 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
1-4
852 return;
executed 4 times by 1 test: return;
Executed by:
  • tst_QPrinter
4
853-
854 if (name.isEmpty()) {
name.isEmpty()Description
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
855 setOutputFormat(QPrinter::PdfFormat);-
856 return;
never executed: return;
0
857 }-
858-
859 QPrinterInfo printerToUse = QPrinterInfo::printerInfo(name);-
860 if (printerToUse.isNull())
printerToUse.isNull()Description
TRUEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-1
861 return;
executed 1 time by 1 test: return;
Executed by:
  • tst_QPrinter
1
862-
863 if (outputFormat() == QPrinter::PdfFormat) {
outputFormat()...ter::PdfFormatDescription
TRUEnever evaluated
FALSEnever evaluated
0
864 d->changeEngines(QPrinter::NativeFormat, printerToUse);-
865 } else {
never executed: end of block
0
866 d->setProperty(QPrintEngine::PPK_PrinterName, name);-
867 }
never executed: end of block
0
868}-
869-
870/*!-
871 \since 4.4-
872-
873 Returns \c true if the printer currently selected is a valid printer-
874 in the system, or a pure PDF printer; otherwise returns \c false.-
875-
876 To detect other failures check the output of QPainter::begin() or QPrinter::newPage().-
877-
878 \snippet printing-qprinter/errors.cpp 0-
879-
880 \sa setPrinterName()-
881*/-
882bool QPrinter::isValid() const-
883{-
884 Q_D(const QPrinter);-
885 if (!qApp)
!QCoreApplication::instance()Description
TRUEnever evaluated
FALSEevaluated 3 times by 1 test
Evaluated by:
  • tst_QPrinter
0-3
886 return false;
never executed: return false;
0
887 return d->validPrinter;
executed 3 times by 1 test: return d->validPrinter;
Executed by:
  • tst_QPrinter
3
888}-
889-
890/*!-
891 \fn QString QPrinter::outputFileName() const-
892-
893 Returns the name of the output file. By default, this is an empty string-
894 (indicating that the printer shouldn't print to file).-
895-
896 \sa QPrintEngine::PrintEnginePropertyKey-
897-
898*/-
899-
900QString QPrinter::outputFileName() const-
901{-
902 Q_D(const QPrinter);-
903 return d->printEngine->property(QPrintEngine::PPK_OutputFileName).toString();
executed 5 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_OutputFileName).toString();
Executed by:
  • tst_QPrinter
5
904}-
905-
906/*!-
907 Sets the name of the output file to \a fileName.-
908-
909 Setting a null or empty name (0 or "") disables printing to a file.-
910 Setting a non-empty name enables printing to a file.-
911-
912 This can change the value of outputFormat().-
913 If the file name has the ".pdf" suffix PDF is generated. If the file name-
914 has a suffix other than ".pdf", the output format used is the-
915 one set with setOutputFormat().-
916-
917 QPrinter uses Qt's cross-platform PDF print engines-
918 respectively. If you can produce this format natively, for example-
919 \macos can generate PDF's from its print engine, set the output format-
920 back to NativeFormat.-
921-
922 \sa outputFileName(), setOutputFormat()-
923*/-
924-
925void QPrinter::setOutputFileName(const QString &fileName)-
926{-
927 Q_D(QPrinter);-
928 ABORT_IF_ACTIVE("QPrinter::setOutputFileName");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 39 times by 1 test
Evaluated by:
  • tst_QPrinter
0-39
929-
930 QFileInfo fi(fileName);-
931 if (!fi.suffix().compare(QLatin1String("pdf"), Qt::CaseInsensitive))
!fi.suffix().c...seInsensitive)Description
TRUEevaluated 6 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEevaluated 33 times by 1 test
Evaluated by:
  • tst_QPrinter
6-33
932 setOutputFormat(QPrinter::PdfFormat);
executed 6 times by 1 test: setOutputFormat(QPrinter::PdfFormat);
Executed by:
  • tst_QPrinter
6
933 else if (fileName.isEmpty())
fileName.isEmpty()Description
TRUEnever evaluated
FALSEevaluated 33 times by 1 test
Evaluated by:
  • tst_QPrinter
0-33
934 setOutputFormat(QPrinter::NativeFormat);
never executed: setOutputFormat(QPrinter::NativeFormat);
0
935-
936 d->setProperty(QPrintEngine::PPK_OutputFileName, fileName);-
937}
executed 39 times by 1 test: end of block
Executed by:
  • tst_QPrinter
39
938-
939-
940/*!-
941 Returns the name of the program that sends the print output to the-
942 printer.-
943-
944 The default is to return an empty string; meaning that QPrinter will try to-
945 be smart in a system-dependent way. On X11 only, you can set it to something-
946 different to use a specific print program. On the other platforms, this-
947 returns an empty string.-
948-
949 \sa setPrintProgram(), setPrinterSelectionOption()-
950*/-
951QString QPrinter::printProgram() const-
952{-
953 Q_D(const QPrinter);-
954 return d->printEngine->property(QPrintEngine::PPK_PrinterProgram).toString();
executed 2 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_PrinterProgram).toString();
Executed by:
  • tst_QPrinter
2
955}-
956-
957-
958/*!-
959 Sets the name of the program that should do the print job to \a-
960 printProg.-
961-
962 On X11, this function sets the program to call with the PDF-
963 output. On other platforms, it has no effect.-
964-
965 \sa printProgram()-
966*/-
967void QPrinter::setPrintProgram(const QString &printProg)-
968{-
969 Q_D(QPrinter);-
970 ABORT_IF_ACTIVE("QPrinter::setPrintProgram");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
971 d->setProperty(QPrintEngine::PPK_PrinterProgram, printProg);-
972}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
973-
974-
975/*!-
976 Returns the document name.-
977-
978 \sa setDocName(), QPrintEngine::PrintEnginePropertyKey-
979*/-
980QString QPrinter::docName() const-
981{-
982 Q_D(const QPrinter);-
983 return d->printEngine->property(QPrintEngine::PPK_DocumentName).toString();
executed 6 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_DocumentName).toString();
Executed by:
  • tst_QPrinter
6
984}-
985-
986-
987/*!-
988 Sets the document name to \a name.-
989-
990 On X11, the document name is for example used as the default-
991 output filename in QPrintDialog. Note that the document name does-
992 not affect the file name if the printer is printing to a file.-
993 Use the setOutputFile() function for this.-
994-
995 \sa docName(), QPrintEngine::PrintEnginePropertyKey-
996*/-
997void QPrinter::setDocName(const QString &name)-
998{-
999 Q_D(QPrinter);-
1000 ABORT_IF_ACTIVE("QPrinter::setDocName");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 2 times by 1 test
Evaluated by:
  • tst_QPrinter
0-2
1001 d->setProperty(QPrintEngine::PPK_DocumentName, name);-
1002}
executed 2 times by 1 test: end of block
Executed by:
  • tst_QPrinter
2
1003-
1004-
1005/*!-
1006 Returns the name of the application that created the document.-
1007-
1008 \sa setCreator()-
1009*/-
1010QString QPrinter::creator() const-
1011{-
1012 Q_D(const QPrinter);-
1013 return d->printEngine->property(QPrintEngine::PPK_Creator).toString();
executed 2 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_Creator).toString();
Executed by:
  • tst_QPrinter
2
1014}-
1015-
1016-
1017/*!-
1018 Sets the name of the application that created the document to \a-
1019 creator.-
1020-
1021 This function is only applicable to the X11 version of Qt. If no-
1022 creator name is specified, the creator will be set to "Qt"-
1023 followed by some version number.-
1024-
1025 \sa creator()-
1026*/-
1027void QPrinter::setCreator(const QString &creator)-
1028{-
1029 Q_D(QPrinter);-
1030 ABORT_IF_ACTIVE("QPrinter::setCreator");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
1031 d->setProperty(QPrintEngine::PPK_Creator, creator);-
1032}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1033-
1034// Defined in QPagedPaintDevice but non-virtual, add QPrinter specific doc here-
1035#ifdef Q_QDOC-
1036/*!-
1037 \fn bool QPrinter::setPageLayout(const QPageLayout &newLayout)-
1038 \since 5.3-
1039-
1040 Sets the page layout to \a newLayout.-
1041-
1042 If the \a newLayout is not valid for the current printer then the page-
1043 layout will not be changed. For example, if the page size is not supported-
1044 by the printer, or if the margins fall outside the printable area.-
1045-
1046 Returns true if the page layout was successfully set to \a newLayout.-
1047-
1048 \sa pageLayout(), setPageSize(), setPageOrientation(), setPageMargins()-
1049*/-
1050-
1051/*!-
1052 \fn bool QPrinter::setPageSize(const QPageSize &pageSize)-
1053 \since 5.3-
1054-
1055 Sets the page size to \a pageSize.-
1056-
1057 If the \a pageSize is not valid for the current printer then the page-
1058 size will not be changed.-
1059-
1060 Changing the page size may affect the current page margins if they fall-
1061 outside the printable margins for the new page size on the current printer.-
1062-
1063 To obtain the current QPageSize use pageLayout().pageSize().-
1064-
1065 Returns true if the page size was successfully set to \a pageSize.-
1066-
1067 \sa pageLayout(), setPageLayout()-
1068*/-
1069-
1070/*!-
1071 \fn bool QPrinter::setPageOrientation(QPageLayout::Orientation orientation)-
1072 \since 5.3-
1073-
1074 Sets the page \a orientation to QPageLayout::Portrait or QPageLayout::Landscape.-
1075-
1076 The printer driver reads this setting and prints the page using the-
1077 specified orientation.-
1078-
1079 On Windows and Mac, this option can be changed while printing and will-
1080 take effect from the next call to newPage().-
1081-
1082 To obtain the current QPageLayout::Orientation use pageLayout().pageOrientation().-
1083-
1084 Returns true if the page orientation was successfully set to \a orientation.-
1085-
1086 \sa pageLayout(), setPageLayout()-
1087*/-
1088-
1089/*!-
1090 \fn bool QPrinter::setPageMargins(const QMarginsF &margins, QPageLayout::Unit units)-
1091 \since 5.3-
1092-
1093 Set the page margins to \a margins in the given \a units. If \a units are-
1094 not provided then the current units are used.-
1095-
1096 If in Full Page mode then no check is performed on the \a margins set,-
1097 otherwise the \a margins must fall within the printable area for the page-
1098 size on the current printer.-
1099-
1100 To obtain the current page margins use pageLayout().pageMargins().-
1101-
1102 Returns \c true if the page margins was successfully set to \a margins.-
1103-
1104 \sa pageLayout(), setPageLayout()-
1105*/-
1106-
1107/*!-
1108 \fn bool QPrinter::setPageMargins(const QMarginsF &margins)-
1109-
1110 Set the page margins to \a margins using the current units.-
1111 Returns \c true if the page margins were set successfully.-
1112-
1113 \sa pageLayout(), setPageLayout()-
1114*/-
1115/*!-
1116 \fn QPageLayout QPrinter::pageLayout() const-
1117 \since 5.3-
1118-
1119 Returns the current page layout. Use this method to access the current-
1120 QPageSize, QPageLayout::Orientation, QMarginsF, fullPageRect() and paintRect().-
1121-
1122 Note that you cannot use the setters on the returned object, you must either-
1123 call the QPrinter methods or setPageLayout().-
1124-
1125 \sa setPageLayout(), setPageSize(), setPageOrientation(), setPageMargins()-
1126*/-
1127#endif-
1128-
1129/*!-
1130 \obsolete Use pageLayout().pageOrientation() instead.-
1131-
1132 Returns the orientation setting. This is driver-dependent, but is usually-
1133 QPrinter::Portrait.-
1134-
1135 \sa pageLayout()-
1136*/-
1137QPrinter::Orientation QPrinter::orientation() const-
1138{-
1139 return QPrinter::Orientation(pageLayout().orientation());
executed 75 times by 1 test: return QPrinter::Orientation(pageLayout().orientation());
Executed by:
  • tst_QPrinter
75
1140}-
1141-
1142-
1143/*!-
1144 \obsolete Use setPageOrientation() instead.-
1145-
1146 Sets the print orientation to \a orientation.-
1147-
1148 The orientation can be either QPrinter::Portrait or-
1149 QPrinter::Landscape.-
1150-
1151 The printer driver reads this setting and prints using the-
1152 specified orientation.-
1153-
1154 On Windows and Mac, this option can be changed while printing and will-
1155 take effect from the next call to newPage().-
1156-
1157 \sa setPageOrientation()-
1158*/-
1159-
1160void QPrinter::setOrientation(Orientation orientation)-
1161{-
1162 setPageOrientation(QPageLayout::Orientation(orientation));-
1163}
executed 48 times by 1 test: end of block
Executed by:
  • tst_QPrinter
48
1164-
1165/*!-
1166 \since 4.4-
1167-
1168 \obsolete Use pageLayout().pageSize().id() instead.-
1169-
1170 Returns the printer paper size. The default value is driver-dependent.-
1171-
1172 \sa pageLayout()-
1173*/-
1174-
1175QPrinter::PaperSize QPrinter::paperSize() const-
1176{-
1177 return pageSize();
executed 2 times by 1 test: return pageSize();
Executed by:
  • tst_QPrinter
2
1178}-
1179-
1180/*!-
1181 \since 4.4-
1182-
1183 \obsolete Use setPageSize(QPageSize) instead.-
1184-
1185 Sets the printer paper size to \a newPaperSize if that size is-
1186 supported. The result is undefined if \a newPaperSize is not-
1187 supported.-
1188-
1189 The default paper size is driver-dependent.-
1190-
1191 This function is useful mostly for setting a default value that-
1192 the user can override in the print dialog.-
1193-
1194 \sa setPageSize()-
1195*/-
1196void QPrinter::setPaperSize(PaperSize newPaperSize)-
1197{-
1198 setPageSize(QPageSize(QPageSize::PageSizeId(newPaperSize)));-
1199}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1200-
1201/*!-
1202 \obsolete Use pageLayout().pageSize().id() instead.-
1203-
1204 Returns the printer page size. The default value is driver-dependent.-
1205-
1206 \sa pageLayout()-
1207*/-
1208QPrinter::PageSize QPrinter::pageSize() const-
1209{-
1210 return QPrinter::PaperSize(pageLayout().pageSize().id());
executed 31 times by 1 test: return QPrinter::PaperSize(pageLayout().pageSize().id());
Executed by:
  • tst_QPrinter
31
1211}-
1212-
1213-
1214/*!-
1215 \obsolete Use setPageSize(QPageSize) instead.-
1216-
1217 Sets the printer page size based on \a newPageSize.-
1218-
1219 \sa setPageSize()-
1220*/-
1221-
1222void QPrinter::setPageSize(PageSize newPageSize)-
1223{-
1224 setPageSize(QPageSize(QPageSize::PageSizeId(newPageSize)));-
1225}
executed 31 times by 1 test: end of block
Executed by:
  • tst_QPrinter
31
1226-
1227/*!-
1228 \since 4.4-
1229-
1230 \obsolete Use setPageSize(QPageSize) instead.-
1231-
1232 Sets the paper size based on \a paperSize in \a unit.-
1233-
1234 Note that the paper size is defined in a portrait layout, regardless of-
1235 what the current printer orientation is set to.-
1236-
1237 \sa setPageSize()-
1238*/-
1239-
1240void QPrinter::setPaperSize(const QSizeF &paperSize, QPrinter::Unit unit)-
1241{-
1242 if (unit == QPrinter::DevicePixel)
unit == QPrinter::DevicePixelDescription
TRUEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
FALSEevaluated 6 times by 1 test
Evaluated by:
  • tst_QPrinter
1-6
1243 setPageSize(QPageSize(paperSize * qt_pixelMultiplier(resolution()), QPageSize::Point));
executed 1 time by 1 test: setPageSize(QPageSize(paperSize * qt_pixelMultiplier(resolution()), QPageSize::Point));
Executed by:
  • tst_QPrinter
1
1244 else-
1245 setPageSize(QPageSize(paperSize, QPageSize::Unit(unit)));
executed 6 times by 1 test: setPageSize(QPageSize(paperSize, QPageSize::Unit(unit)));
Executed by:
  • tst_QPrinter
6
1246}-
1247-
1248/*!-
1249 \reimp-
1250-
1251 \obsolete Use setPageSize(QPageSize) instead.-
1252-
1253 Use setPageSize(QPageSize) instead.-
1254-
1255 Note that the page size is defined in a portrait layout, regardless of-
1256 what the current printer orientation is set to.-
1257-
1258 \sa setPageSize()-
1259*/-
1260void QPrinter::setPageSizeMM(const QSizeF &size)-
1261{-
1262 setPageSize(QPageSize(size, QPageSize::Millimeter));-
1263}
executed 8 times by 1 test: end of block
Executed by:
  • tst_QPrinter
8
1264-
1265/*!-
1266 \since 4.4-
1267-
1268 \obsolete Use pageLayout().pageSize().size() or-
1269 pageLayout().fullPageSize() instead.-
1270-
1271 Returns the paper size in \a unit.-
1272-
1273 Note that the returned size reflects the current paper orientation.-
1274-
1275 \sa pageLayout()-
1276*/-
1277-
1278QSizeF QPrinter::paperSize(Unit unit) const-
1279{-
1280 if (unit == QPrinter::DevicePixel)
unit == QPrinter::DevicePixelDescription
TRUEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
FALSEevaluated 21 times by 1 test
Evaluated by:
  • tst_QPrinter
1-21
1281 return pageLayout().fullRectPixels(resolution()).size();
executed 1 time by 1 test: return pageLayout().fullRectPixels(resolution()).size();
Executed by:
  • tst_QPrinter
1
1282 else-
1283 return pageLayout().fullRect(QPageLayout::Unit(unit)).size();
executed 21 times by 1 test: return pageLayout().fullRect(QPageLayout::Unit(unit)).size();
Executed by:
  • tst_QPrinter
21
1284}-
1285-
1286/*!-
1287 \since 5.1-
1288-
1289 \obsolete Use setPageSize(QPageSize) instead.-
1290-
1291 Sets the paper used by the printer to \a paperName.-
1292-
1293 \sa setPageSize()-
1294*/-
1295-
1296void QPrinter::setPaperName(const QString &paperName)-
1297{-
1298 Q_D(QPrinter);-
1299 if (d->paintEngine->type() != QPaintEngine::Pdf)
d->paintEngine...intEngine::PdfDescription
TRUEnever evaluated
FALSEnever evaluated
0
1300 ABORT_IF_ACTIVE("QPrinter::setPaperName");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEnever evaluated
0
1301 d->setProperty(QPrintEngine::PPK_PaperName, paperName);-
1302}
never executed: end of block
0
1303-
1304/*!-
1305 \since 5.1-
1306-
1307 \obsolete Use pageLayout().pageSize().name() instead.-
1308-
1309 Returns the paper name of the paper set on the printer.-
1310-
1311 The default value for this is driver-dependent.-
1312-
1313 \sa pageLayout()-
1314*/-
1315-
1316QString QPrinter::paperName() const-
1317{-
1318 Q_D(const QPrinter);-
1319 return d->printEngine->property(QPrintEngine::PPK_PaperName).toString();
never executed: return d->printEngine->property(QPrintEngine::PPK_PaperName).toString();
0
1320}-
1321-
1322/*!-
1323 Sets the page order to \a pageOrder.-
1324-
1325 The page order can be QPrinter::FirstPageFirst or-
1326 QPrinter::LastPageFirst. The application is responsible for-
1327 reading the page order and printing accordingly.-
1328-
1329 This function is mostly useful for setting a default value that-
1330 the user can override in the print dialog.-
1331-
1332 This function is only supported under X11.-
1333*/-
1334-
1335void QPrinter::setPageOrder(PageOrder pageOrder)-
1336{-
1337 d->pageOrderAscending = (pageOrder == FirstPageFirst);-
1338-
1339 Q_D(QPrinter);-
1340 ABORT_IF_ACTIVE("QPrinter::setPageOrder");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
1341 d->setProperty(QPrintEngine::PPK_PageOrder, pageOrder);-
1342}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1343-
1344-
1345/*!-
1346 Returns the current page order.-
1347-
1348 The default page order is \c FirstPageFirst.-
1349*/-
1350-
1351QPrinter::PageOrder QPrinter::pageOrder() const-
1352{-
1353 Q_D(const QPrinter);-
1354 return QPrinter::PageOrder(d->printEngine->property(QPrintEngine::PPK_PageOrder).toInt());
executed 6 times by 1 test: return QPrinter::PageOrder(d->printEngine->property(QPrintEngine::PPK_PageOrder).toInt());
Executed by:
  • tst_QPrinter
6
1355}-
1356-
1357-
1358/*!-
1359 Sets the printer's color mode to \a newColorMode, which can be-
1360 either \c Color or \c GrayScale.-
1361-
1362 \sa colorMode()-
1363*/-
1364-
1365void QPrinter::setColorMode(ColorMode newColorMode)-
1366{-
1367 Q_D(QPrinter);-
1368 ABORT_IF_ACTIVE("QPrinter::setColorMode");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
1369 d->setProperty(QPrintEngine::PPK_ColorMode, newColorMode);-
1370}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1371-
1372-
1373/*!-
1374 Returns the current color mode.-
1375-
1376 \sa setColorMode()-
1377*/-
1378QPrinter::ColorMode QPrinter::colorMode() const-
1379{-
1380 Q_D(const QPrinter);-
1381 return QPrinter::ColorMode(d->printEngine->property(QPrintEngine::PPK_ColorMode).toInt());
executed 6 times by 1 test: return QPrinter::ColorMode(d->printEngine->property(QPrintEngine::PPK_ColorMode).toInt());
Executed by:
  • tst_QPrinter
6
1382}-
1383-
1384-
1385/*!-
1386 \obsolete-
1387 Returns the number of copies to be printed. The default value is 1.-
1388-
1389 On Windows, \macos and X11 systems that support CUPS, this will always-
1390 return 1 as these operating systems can internally handle the number-
1391 of copies.-
1392-
1393 On X11, this value will return the number of times the application is-
1394 required to print in order to match the number specified in the printer setup-
1395 dialog. This has been done since some printer drivers are not capable of-
1396 buffering up the copies and in those cases the application must make an-
1397 explicit call to the print code for each copy.-
1398-
1399 Use copyCount() in conjunction with supportsMultipleCopies() instead.-
1400-
1401 \sa setNumCopies(), actualNumCopies()-
1402*/-
1403-
1404int QPrinter::numCopies() const-
1405{-
1406 Q_D(const QPrinter);-
1407 return d->printEngine->property(QPrintEngine::PPK_NumberOfCopies).toInt();
executed 3 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_NumberOfCopies).toInt();
Executed by:
  • tst_QPrinter
3
1408}-
1409-
1410-
1411/*!-
1412 \obsolete-
1413 \since 4.6-
1414-
1415 Returns the number of copies that will be printed. The default-
1416 value is 1.-
1417-
1418 This function always returns the actual value specified in the print-
1419 dialog or using setNumCopies().-
1420-
1421 Use copyCount() instead.-
1422-
1423 \sa setNumCopies(), numCopies()-
1424*/-
1425int QPrinter::actualNumCopies() const-
1426{-
1427 return copyCount();
executed 3 times by 1 test: return copyCount();
Executed by:
  • tst_QPrinter
3
1428}-
1429-
1430-
1431-
1432/*!-
1433 \obsolete-
1434 Sets the number of copies to be printed to \a numCopies.-
1435-
1436 The printer driver reads this setting and prints the specified-
1437 number of copies.-
1438-
1439 Use setCopyCount() instead.-
1440-
1441 \sa numCopies()-
1442*/-
1443-
1444void QPrinter::setNumCopies(int numCopies)-
1445{-
1446 Q_D(QPrinter);-
1447 ABORT_IF_ACTIVE("QPrinter::setNumCopies");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
1448 d->setProperty(QPrintEngine::PPK_NumberOfCopies, numCopies);-
1449}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1450-
1451/*!-
1452 \since 4.7-
1453-
1454 Sets the number of copies to be printed to \a count.-
1455-
1456 The printer driver reads this setting and prints the specified number of-
1457 copies.-
1458-
1459 \sa copyCount(), supportsMultipleCopies()-
1460*/-
1461-
1462void QPrinter::setCopyCount(int count)-
1463{-
1464 Q_D(QPrinter);-
1465 ABORT_IF_ACTIVE("QPrinter::setCopyCount;");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
1466 d->setProperty(QPrintEngine::PPK_CopyCount, count);-
1467}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1468-
1469/*!-
1470 \since 4.7-
1471-
1472 Returns the number of copies that will be printed. The default value is 1.-
1473-
1474 \sa setCopyCount(), supportsMultipleCopies()-
1475*/-
1476-
1477int QPrinter::copyCount() const-
1478{-
1479 Q_D(const QPrinter);-
1480 return d->printEngine->property(QPrintEngine::PPK_CopyCount).toInt();
executed 10 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_CopyCount).toInt();
Executed by:
  • tst_QPrinter
10
1481}-
1482-
1483/*!-
1484 \since 4.7-
1485-
1486 Returns \c true if the printer supports printing multiple copies of the same-
1487 document in one job; otherwise false is returned.-
1488-
1489 On most systems this function will return true. However, on X11 systems-
1490 that do not support CUPS, this function will return false. That means the-
1491 application has to handle the number of copies by printing the same-
1492 document the required number of times.-
1493-
1494 \sa setCopyCount(), copyCount()-
1495*/-
1496-
1497bool QPrinter::supportsMultipleCopies() const-
1498{-
1499 Q_D(const QPrinter);-
1500 return d->printEngine->property(QPrintEngine::PPK_SupportsMultipleCopies).toBool();
executed 1 time by 1 test: return d->printEngine->property(QPrintEngine::PPK_SupportsMultipleCopies).toBool();
Executed by:
  • tst_QPrinter
1
1501}-
1502-
1503/*!-
1504 \since 4.1-
1505-
1506 Returns \c true if collation is turned on when multiple copies is selected.-
1507 Returns \c false if it is turned off when multiple copies is selected.-
1508 When collating is turned off the printing of each individual page will be repeated-
1509 the numCopies() amount before the next page is started. With collating turned on-
1510 all pages are printed before the next copy of those pages is started.-
1511-
1512 \sa setCollateCopies()-
1513*/-
1514bool QPrinter::collateCopies() const-
1515{-
1516 Q_D(const QPrinter);-
1517 return d->printEngine->property(QPrintEngine::PPK_CollateCopies).toBool();
executed 6 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_CollateCopies).toBool();
Executed by:
  • tst_QPrinter
6
1518}-
1519-
1520-
1521/*!-
1522 \since 4.1-
1523-
1524 Sets the default value for collation checkbox when the print-
1525 dialog appears. If \a collate is true, it will enable-
1526 setCollateCopiesEnabled(). The default value is false. This value-
1527 will be changed by what the user presses in the print dialog.-
1528-
1529 \sa collateCopies()-
1530*/-
1531void QPrinter::setCollateCopies(bool collate)-
1532{-
1533 Q_D(QPrinter);-
1534 ABORT_IF_ACTIVE("QPrinter::setCollateCopies");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
1535 d->setProperty(QPrintEngine::PPK_CollateCopies, collate);-
1536}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1537-
1538-
1539-
1540/*!-
1541 If \a fp is true, enables support for painting over the entire page;-
1542 otherwise restricts painting to the printable area reported by the-
1543 device.-
1544-
1545 By default, full page printing is disabled. In this case, the origin-
1546 of the QPrinter's coordinate system coincides with the top-left-
1547 corner of the printable area.-
1548-
1549 If full page printing is enabled, the origin of the QPrinter's-
1550 coordinate system coincides with the top-left corner of the paper-
1551 itself. In this case, the-
1552 \l{QPaintDevice::PaintDeviceMetric}{device metrics} will report-
1553 the exact same dimensions as indicated by \l{PaperSize}. It may not-
1554 be possible to print on the entire physical page because of the-
1555 printer's margins, so the application must account for the margins-
1556 itself.-
1557-
1558 \sa fullPage(), pageLayout(), setPageSize(), width(), height()-
1559*/-
1560-
1561void QPrinter::setFullPage(bool fp)-
1562{-
1563 Q_D(QPrinter);-
1564 // Set the print engine-
1565 d->setProperty(QPrintEngine::PPK_FullPage, fp);-
1566 // Set QPagedPaintDevice layout to match the current print engine value-
1567 devicePageLayout() = pageLayout();-
1568}
executed 19 times by 1 test: end of block
Executed by:
  • tst_QPrinter
19
1569-
1570-
1571/*!-
1572 Returns \c true if the origin of the printer's coordinate system is-
1573 at the corner of the page and false if it is at the edge of the-
1574 printable area.-
1575-
1576 See setFullPage() for details and caveats.-
1577-
1578 \sa setFullPage(), pageLayout()-
1579*/-
1580-
1581bool QPrinter::fullPage() const-
1582{-
1583 Q_D(const QPrinter);-
1584 return d->printEngine->property(QPrintEngine::PPK_FullPage).toBool();
executed 3 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_FullPage).toBool();
Executed by:
  • tst_QPrinter
3
1585}-
1586-
1587-
1588/*!-
1589 Requests that the printer prints at \a dpi or as near to \a dpi as-
1590 possible.-
1591-
1592 This setting affects the coordinate system as returned by, for-
1593 example QPainter::viewport().-
1594-
1595 This function must be called before QPainter::begin() to have an effect on-
1596 all platforms.-
1597-
1598 \sa resolution(), setPaperSize()-
1599*/-
1600-
1601void QPrinter::setResolution(int dpi)-
1602{-
1603 Q_D(QPrinter);-
1604 ABORT_IF_ACTIVE("QPrinter::setResolution");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 27 times by 1 test
Evaluated by:
  • tst_QPrinter
0-27
1605 d->setProperty(QPrintEngine::PPK_Resolution, dpi);-
1606}
executed 27 times by 1 test: end of block
Executed by:
  • tst_QPrinter
27
1607-
1608-
1609/*!-
1610 Returns the current assumed resolution of the printer, as set by-
1611 setResolution() or by the printer driver.-
1612-
1613 \sa setResolution()-
1614*/-
1615-
1616int QPrinter::resolution() const-
1617{-
1618 Q_D(const QPrinter);-
1619 return d->printEngine->property(QPrintEngine::PPK_Resolution).toInt();
executed 110 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_Resolution).toInt();
Executed by:
  • tst_QPrinter
110
1620}-
1621-
1622/*!-
1623 Sets the paper source setting to \a source.-
1624-
1625 Windows only: This option can be changed while printing and will-
1626 take effect from the next call to newPage()-
1627-
1628 \sa paperSource()-
1629*/-
1630-
1631void QPrinter::setPaperSource(PaperSource source)-
1632{-
1633 Q_D(QPrinter);-
1634 d->setProperty(QPrintEngine::PPK_PaperSource, source);-
1635}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1636-
1637/*!-
1638 Returns the printer's paper source. This is \c Manual or a printer-
1639 tray or paper cassette.-
1640*/-
1641QPrinter::PaperSource QPrinter::paperSource() const-
1642{-
1643 Q_D(const QPrinter);-
1644 return QPrinter::PaperSource(d->printEngine->property(QPrintEngine::PPK_PaperSource).toInt());
executed 2 times by 1 test: return QPrinter::PaperSource(d->printEngine->property(QPrintEngine::PPK_PaperSource).toInt());
Executed by:
  • tst_QPrinter
2
1645}-
1646-
1647-
1648/*!-
1649 \since 4.1-
1650-
1651 Enabled or disables font embedding depending on \a enable.-
1652-
1653 \sa fontEmbeddingEnabled()-
1654*/-
1655void QPrinter::setFontEmbeddingEnabled(bool enable)-
1656{-
1657 Q_D(QPrinter);-
1658 d->setProperty(QPrintEngine::PPK_FontEmbedding, enable);-
1659}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1660-
1661/*!-
1662 \since 4.1-
1663-
1664 Returns \c true if font embedding is enabled.-
1665-
1666 \sa setFontEmbeddingEnabled()-
1667*/-
1668bool QPrinter::fontEmbeddingEnabled() const-
1669{-
1670 Q_D(const QPrinter);-
1671 return d->printEngine->property(QPrintEngine::PPK_FontEmbedding).toBool();
executed 2 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_FontEmbedding).toBool();
Executed by:
  • tst_QPrinter
2
1672}-
1673-
1674/*!-
1675 \enum QPrinter::DuplexMode-
1676 \since 4.4-
1677-
1678 This enum is used to indicate whether printing will occur on one or both sides-
1679 of each sheet of paper (simplex or duplex printing).-
1680-
1681 \value DuplexNone Single sided (simplex) printing only.-
1682 \value DuplexAuto The printer's default setting is used to determine whether-
1683 duplex printing is used.-
1684 \value DuplexLongSide Both sides of each sheet of paper are used for printing.-
1685 The paper is turned over its longest edge before the second-
1686 side is printed-
1687 \value DuplexShortSide Both sides of each sheet of paper are used for printing.-
1688 The paper is turned over its shortest edge before the second-
1689 side is printed-
1690*/-
1691-
1692/*!-
1693 \since 4.2-
1694-
1695 \obsolete Use setDuplex() instead.-
1696-
1697 Enables double sided printing if \a doubleSided is true; otherwise disables it.-
1698-
1699 \sa setDuplex()-
1700*/-
1701void QPrinter::setDoubleSidedPrinting(bool doubleSided)-
1702{-
1703 setDuplex(doubleSided ? DuplexAuto : DuplexNone);-
1704}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1705-
1706-
1707/*!-
1708 \since 4.2-
1709-
1710 \obsolete Use duplex() instead.-
1711-
1712 Returns \c true if double side printing is enabled.-
1713-
1714 \sa duplex()-
1715*/-
1716bool QPrinter::doubleSidedPrinting() const-
1717{-
1718 return duplex() != DuplexNone;
executed 2 times by 1 test: return duplex() != DuplexNone;
Executed by:
  • tst_QPrinter
2
1719}-
1720-
1721/*!-
1722 \since 4.4-
1723-
1724 Enables double sided printing based on the \a duplex mode.-
1725-
1726 \sa duplex()-
1727*/-
1728void QPrinter::setDuplex(DuplexMode duplex)-
1729{-
1730 Q_D(QPrinter);-
1731 d->setProperty(QPrintEngine::PPK_Duplex, duplex);-
1732}
executed 2 times by 1 test: end of block
Executed by:
  • tst_QPrinter
2
1733-
1734/*!-
1735 \since 4.4-
1736-
1737 Returns the current duplex mode.-
1738-
1739 \sa setDuplex()-
1740*/-
1741QPrinter::DuplexMode QPrinter::duplex() const-
1742{-
1743 Q_D(const QPrinter);-
1744 return static_cast <DuplexMode> (d->printEngine->property(QPrintEngine::PPK_Duplex).toInt());
executed 8 times by 1 test: return static_cast <DuplexMode> (d->printEngine->property(QPrintEngine::PPK_Duplex).toInt());
Executed by:
  • tst_QPrinter
8
1745}-
1746-
1747/*!-
1748 \since 4.4-
1749-
1750 Returns the page's rectangle in \a unit; this is usually smaller-
1751 than the paperRect() since the page normally has margins between-
1752 its borders and the paper.-
1753-
1754 \sa paperSize()-
1755*/-
1756QRectF QPrinter::pageRect(Unit unit) const-
1757{-
1758 if (unit == QPrinter::DevicePixel)
unit == QPrinter::DevicePixelDescription
TRUEevaluated 4 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEevaluated 18 times by 1 test
Evaluated by:
  • tst_QPrinter
4-18
1759 return pageLayout().paintRectPixels(resolution());
executed 4 times by 1 test: return pageLayout().paintRectPixels(resolution());
Executed by:
  • tst_QPrinter
4
1760 else-
1761 return pageLayout().paintRect(QPageLayout::Unit(unit));
executed 18 times by 1 test: return pageLayout().paintRect(QPageLayout::Unit(unit));
Executed by:
  • tst_QPrinter
18
1762}-
1763-
1764-
1765/*!-
1766 \since 4.4-
1767-
1768 Returns the paper's rectangle in \a unit; this is usually larger-
1769 than the pageRect().-
1770-
1771 \sa pageRect()-
1772*/-
1773QRectF QPrinter::paperRect(Unit unit) const-
1774{-
1775 if (unit == QPrinter::DevicePixel)
unit == QPrinter::DevicePixelDescription
TRUEnever evaluated
FALSEevaluated 18 times by 1 test
Evaluated by:
  • tst_QPrinter
0-18
1776 return pageLayout().fullRectPixels(resolution());
never executed: return pageLayout().fullRectPixels(resolution());
0
1777 else-
1778 return pageLayout().fullRect(QPageLayout::Unit(unit));
executed 18 times by 1 test: return pageLayout().fullRect(QPageLayout::Unit(unit));
Executed by:
  • tst_QPrinter
18
1779}-
1780-
1781/*!-
1782 \obsolete Use pageLayout().paintRectPixels(resolution()) instead.-
1783-
1784 Returns the page's rectangle; this is usually smaller than the-
1785 paperRect() since the page normally has margins between its-
1786 borders and the paper.-
1787-
1788 The unit of the returned rectangle is DevicePixel.-
1789-
1790 \sa pageLayout()-
1791*/-
1792QRect QPrinter::pageRect() const-
1793{-
1794 Q_D(const QPrinter);-
1795 return d->printEngine->property(QPrintEngine::PPK_PageRect).toRect();
executed 24 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_PageRect).toRect();
Executed by:
  • tst_QPrinter
24
1796}-
1797-
1798/*!-
1799 \obsolete Use pageLayout().fullRectPixels(resolution()) instead.-
1800-
1801 Returns the paper's rectangle; this is usually larger than the-
1802 pageRect().-
1803-
1804 The unit of the returned rectangle is DevicePixel.-
1805-
1806 \sa pageLayout()-
1807*/-
1808QRect QPrinter::paperRect() const-
1809{-
1810 Q_D(const QPrinter);-
1811 return d->printEngine->property(QPrintEngine::PPK_PaperRect).toRect();
executed 78 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_PaperRect).toRect();
Executed by:
  • tst_QPrinter
78
1812}-
1813-
1814/*!-
1815 \since 4.4-
1816-
1817 \obsolete Use setPageMargins(QMarginsF, QPageLayout::Unit) instead.-
1818-
1819 This function sets the \a left, \a top, \a right and \a bottom-
1820 page margins for this printer. The unit of the margins are-
1821 specified with the \a unit parameter.-
1822-
1823 \sa setPageMargins()-
1824*/-
1825void QPrinter::setPageMargins(qreal left, qreal top, qreal right, qreal bottom, QPrinter::Unit unit)-
1826{-
1827 if (unit == QPrinter::DevicePixel) {
unit == QPrinter::DevicePixelDescription
TRUEnever evaluated
FALSEevaluated 10 times by 1 test
Evaluated by:
  • tst_QPrinter
0-10
1828 QMarginsF margins = QMarginsF(left, top, right, bottom);-
1829 margins *= qt_pixelMultiplier(resolution());-
1830 margins = qt_convertMargins(margins, QPageLayout::Point, pageLayout().units());-
1831 setPageMargins(margins, pageLayout().units());-
1832 } else {
never executed: end of block
0
1833 setPageMargins(QMarginsF(left, top, right, bottom), QPageLayout::Unit(unit));-
1834 }
executed 10 times by 1 test: end of block
Executed by:
  • tst_QPrinter
10
1835}-
1836-
1837/*!-
1838 \reimp-
1839-
1840 \obsolete Use setPageMargins(QMarginsF, QPageLayout::Unit) instead.-
1841-
1842 \sa setPageMargins()-
1843 */-
1844void QPrinter::setMargins(const Margins &m)-
1845{-
1846 setPageMargins(QMarginsF(m.left, m.top, m.right, m.bottom), QPageLayout::Millimeter);-
1847}
executed 3 times by 1 test: end of block
Executed by:
  • tst_QPrinter
3
1848-
1849/*!-
1850 \since 4.4-
1851-
1852 \obsolete Use pageLayout().pageMargins() instead.-
1853-
1854 Returns the page margins for this printer in \a left, \a top, \a-
1855 right, \a bottom. The unit of the returned margins are specified-
1856 with the \a unit parameter.-
1857-
1858 \sa pageLayout(), setPageMargins()-
1859*/-
1860void QPrinter::getPageMargins(qreal *left, qreal *top, qreal *right, qreal *bottom, QPrinter::Unit unit) const-
1861{-
1862 QMarginsF margins;-
1863 if (unit == QPrinter::DevicePixel) {
unit == QPrinter::DevicePixelDescription
TRUEnever evaluated
FALSEevaluated 42 times by 1 test
Evaluated by:
  • tst_QPrinter
0-42
1864 QMargins tmp = pageLayout().marginsPixels(resolution());-
1865 margins = QMarginsF(tmp.left(), tmp.top(), tmp.right(), tmp.bottom());-
1866 } else {
never executed: end of block
0
1867 margins = pageLayout().margins(QPageLayout::Unit(unit));-
1868 }
executed 42 times by 1 test: end of block
Executed by:
  • tst_QPrinter
42
1869 if (left)
leftDescription
TRUEevaluated 42 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-42
1870 *left = margins.left();
executed 42 times by 1 test: *left = margins.left();
Executed by:
  • tst_QPrinter
42
1871 if (right)
rightDescription
TRUEevaluated 42 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-42
1872 *right = margins.right();
executed 42 times by 1 test: *right = margins.right();
Executed by:
  • tst_QPrinter
42
1873 if (top)
topDescription
TRUEevaluated 42 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-42
1874 *top = margins.top();
executed 42 times by 1 test: *top = margins.top();
Executed by:
  • tst_QPrinter
42
1875 if (bottom)
bottomDescription
TRUEevaluated 42 times by 1 test
Evaluated by:
  • tst_QPrinter
FALSEnever evaluated
0-42
1876 *bottom = margins.bottom();
executed 42 times by 1 test: *bottom = margins.bottom();
Executed by:
  • tst_QPrinter
42
1877}
executed 42 times by 1 test: end of block
Executed by:
  • tst_QPrinter
42
1878-
1879/*!-
1880 \internal-
1881-
1882 Returns the metric for the given \a id.-
1883*/-
1884int QPrinter::metric(PaintDeviceMetric id) const-
1885{-
1886 Q_D(const QPrinter);-
1887 return d->printEngine->metric(id);
executed 193 times by 1 test: return d->printEngine->metric(id);
Executed by:
  • tst_QPrinter
193
1888}-
1889-
1890/*!-
1891 Returns the paint engine used by the printer.-
1892*/-
1893QPaintEngine *QPrinter::paintEngine() const-
1894{-
1895 Q_D(const QPrinter);-
1896 return d->paintEngine;
executed 22 times by 1 test: return d->paintEngine;
Executed by:
  • tst_QPrinter
22
1897}-
1898-
1899/*!-
1900 \since 4.1-
1901-
1902 Returns the print engine used by the printer.-
1903*/-
1904QPrintEngine *QPrinter::printEngine() const-
1905{-
1906 Q_D(const QPrinter);-
1907 return d->printEngine;
never executed: return d->printEngine;
0
1908}-
1909-
1910/*!-
1911 \obsolete Use QPageSize::id(windowsId) and setPageLayout(QPageSize) instead.-
1912-
1913 Sets the page size to be used by the printer under Windows to \a-
1914 pageSize.-
1915-
1916 \sa pageLayout()-
1917*/-
1918void QPrinter::setWinPageSize(int pageSize)-
1919{-
1920 Q_D(QPrinter);-
1921 ABORT_IF_ACTIVE("QPrinter::setWinPageSize");
never executed: return;
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 1 time by 1 test
Evaluated by:
  • tst_QPrinter
0-1
1922 d->setProperty(QPrintEngine::PPK_WindowsPageSize, pageSize);-
1923}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
1924-
1925/*!-
1926 \obsolete Use pageLayout.pageSize().windowsId() instead.-
1927-
1928 Returns the page size used by the printer under Windows.-
1929-
1930 \sa pageLayout()-
1931*/-
1932int QPrinter::winPageSize() const-
1933{-
1934 Q_D(const QPrinter);-
1935 return d->printEngine->property(QPrintEngine::PPK_WindowsPageSize).toInt();
executed 2 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_WindowsPageSize).toInt();
Executed by:
  • tst_QPrinter
2
1936}-
1937-
1938/*!-
1939 Returns a list of the resolutions (a list of dots-per-inch-
1940 integers) that the printer says it supports.-
1941-
1942 For X11 where all printing is directly to PDF, this-
1943 function will always return a one item list containing only the-
1944 PDF resolution, i.e., 72 (72 dpi -- but see PrinterMode).-
1945*/-
1946QList<int> QPrinter::supportedResolutions() const-
1947{-
1948 Q_D(const QPrinter);-
1949 const QList<QVariant> varlist-
1950 = d->printEngine->property(QPrintEngine::PPK_SupportedResolutions).toList();-
1951 QList<int> intlist;-
1952 intlist.reserve(varlist.size());-
1953 for (auto var : varlist)-
1954 intlist << var.toInt();
executed 1 time by 1 test: intlist << var.toInt();
Executed by:
  • tst_QPrinter
1
1955 return intlist;
executed 1 time by 1 test: return intlist;
Executed by:
  • tst_QPrinter
1
1956}-
1957-
1958/*!-
1959 Tells the printer to eject the current page and to continue-
1960 printing on a new page. Returns \c true if this was successful;-
1961 otherwise returns \c false.-
1962-
1963 Calling newPage() on an inactive QPrinter object will always-
1964 fail.-
1965*/-
1966bool QPrinter::newPage()-
1967{-
1968 Q_D(QPrinter);-
1969 if (d->printEngine->printerState() != QPrinter::Active)
d->printEngine...rinter::ActiveDescription
TRUEnever evaluated
FALSEevaluated 3 times by 1 test
Evaluated by:
  • tst_QPrinter
0-3
1970 return false;
never executed: return false;
0
1971 return d->printEngine->newPage();
executed 3 times by 1 test: return d->printEngine->newPage();
Executed by:
  • tst_QPrinter
3
1972}-
1973-
1974/*!-
1975 Aborts the current print run. Returns \c true if the print run was-
1976 successfully aborted and printerState() will return QPrinter::Aborted; otherwise-
1977 returns \c false.-
1978-
1979 It is not always possible to abort a print job. For example,-
1980 all the data has gone to the printer but the printer cannot or-
1981 will not cancel the job when asked to.-
1982*/-
1983bool QPrinter::abort()-
1984{-
1985 Q_D(QPrinter);-
1986 return d->printEngine->abort();
never executed: return d->printEngine->abort();
0
1987}-
1988-
1989/*!-
1990 Returns the current state of the printer. This may not always be-
1991 accurate (for example if the printer doesn't have the capability-
1992 of reporting its state to the operating system).-
1993*/-
1994QPrinter::PrinterState QPrinter::printerState() const-
1995{-
1996 Q_D(const QPrinter);-
1997 return d->printEngine->printerState();
never executed: return d->printEngine->printerState();
0
1998}-
1999-
2000#ifdef Q_OS_WIN-
2001/*!-
2002 Returns the supported paper sizes for this printer.-
2003-
2004 The values will be either a value that matches an entry in the-
2005 QPrinter::PaperSource enum or a driver spesific value. The driver-
2006 spesific values are greater than the constant DMBIN_USER declared-
2007 in wingdi.h.-
2008-
2009 \warning This function is only available in windows.-
2010*/-
2011-
2012QList<QPrinter::PaperSource> QPrinter::supportedPaperSources() const-
2013{-
2014 Q_D(const QPrinter);-
2015 QVariant v = d->printEngine->property(QPrintEngine::PPK_PaperSources);-
2016-
2017 const QList<QVariant> variant_list = v.toList();-
2018 QList<QPrinter::PaperSource> int_list;-
2019 int_list.reserve(variant_list.size());-
2020 for (const auto &variant : variant_list)-
2021 int_list << QPrinter::PaperSource(variant.toInt());-
2022-
2023 return int_list;-
2024}-
2025-
2026#endif // Q_OS_WIN-
2027-
2028/*!-
2029 \fn QString QPrinter::printerSelectionOption() const-
2030-
2031 Returns the printer options selection string. This is useful only-
2032 if the print command has been explicitly set.-
2033-
2034 The default value (an empty string) implies that the printer should-
2035 be selected in a system-dependent manner.-
2036-
2037 Any other value implies that the given value should be used.-
2038-
2039 This function always returns an empty string on Windows and Mac.-
2040-
2041 \sa setPrinterSelectionOption(), setPrintProgram()-
2042*/-
2043-
2044QString QPrinter::printerSelectionOption() const-
2045{-
2046 Q_D(const QPrinter);-
2047 return d->printEngine->property(QPrintEngine::PPK_SelectionOption).toString();
executed 2 times by 1 test: return d->printEngine->property(QPrintEngine::PPK_SelectionOption).toString();
Executed by:
  • tst_QPrinter
2
2048}-
2049-
2050/*!-
2051 \fn void QPrinter::setPrinterSelectionOption(const QString &option)-
2052-
2053 Sets the printer to use \a option to select the printer. \a option-
2054 is null by default (which implies that Qt should be smart enough-
2055 to guess correctly), but it can be set to other values to use a-
2056 specific printer selection option.-
2057-
2058 If the printer selection option is changed while the printer is-
2059 active, the current print job may or may not be affected.-
2060-
2061 This function has no effect on Windows or Mac.-
2062-
2063 \sa printerSelectionOption(), setPrintProgram()-
2064*/-
2065-
2066void QPrinter::setPrinterSelectionOption(const QString &option)-
2067{-
2068 Q_D(QPrinter);-
2069 d->setProperty(QPrintEngine::PPK_SelectionOption, option);-
2070}
executed 1 time by 1 test: end of block
Executed by:
  • tst_QPrinter
1
2071-
2072/*!-
2073 \since 4.1-
2074 \fn int QPrinter::fromPage() const-
2075-
2076 Returns the number of the first page in a range of pages to be printed-
2077 (the "from page" setting). Pages in a document are numbered according to-
2078 the convention that the first page is page 1.-
2079-
2080 By default, this function returns a special value of 0, meaning that-
2081 the "from page" setting is unset.-
2082-
2083 \note If fromPage() and toPage() both return 0, this indicates that-
2084 \e{the whole document will be printed}.-
2085-
2086 \sa setFromTo(), toPage()-
2087*/-
2088-
2089int QPrinter::fromPage() const-
2090{-
2091 return d->fromPage;
executed 14 times by 2 tests: return d->fromPage;
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
14
2092}-
2093-
2094/*!-
2095 \since 4.1-
2096-
2097 Returns the number of the last page in a range of pages to be printed-
2098 (the "to page" setting). Pages in a document are numbered according to-
2099 the convention that the first page is page 1.-
2100-
2101 By default, this function returns a special value of 0, meaning that-
2102 the "to page" setting is unset.-
2103-
2104 \note If fromPage() and toPage() both return 0, this indicates that-
2105 \e{the whole document will be printed}.-
2106-
2107 The programmer is responsible for reading this setting and-
2108 printing accordingly.-
2109-
2110 \sa setFromTo(), fromPage()-
2111*/-
2112-
2113int QPrinter::toPage() const-
2114{-
2115 return d->toPage;
executed 13 times by 2 tests: return d->toPage;
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
13
2116}-
2117-
2118/*!-
2119 \since 4.1-
2120-
2121 Sets the range of pages to be printed to cover the pages with numbers-
2122 specified by \a from and \a to, where \a from corresponds to the first-
2123 page in the range and \a to corresponds to the last.-
2124-
2125 \note Pages in a document are numbered according to the convention that-
2126 the first page is page 1. However, if \a from and \a to are both set to 0,-
2127 the \e{whole document will be printed}.-
2128-
2129 This function is mostly used to set a default value that the user can-
2130 override in the print dialog when you call setup().-
2131-
2132 \sa fromPage(), toPage()-
2133*/-
2134-
2135void QPrinter::setFromTo(int from, int to)-
2136{-
2137 if (from > to) {
from > toDescription
TRUEnever evaluated
FALSEevaluated 3 times by 2 tests
Evaluated by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
0-3
2138 qWarning("QPrinter::setFromTo: 'from' must be less than or equal to 'to'");-
2139 from = to;-
2140 }
never executed: end of block
0
2141 d->fromPage = from;-
2142 d->toPage = to;-
2143}
executed 3 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
3
2144-
2145/*!-
2146 \since 4.1-
2147-
2148 Sets the print range option in to be \a range.-
2149*/-
2150void QPrinter::setPrintRange( PrintRange range )-
2151{-
2152 d->printSelectionOnly = (range == Selection);-
2153-
2154 Q_D(QPrinter);-
2155 d->printRange = range;-
2156}
executed 5 times by 2 tests: end of block
Executed by:
  • tst_QAbstractPrintDialog
  • tst_QPrinter
5
2157-
2158/*!-
2159 \since 4.1-
2160-
2161 Returns the page range of the QPrinter. After the print setup-
2162 dialog has been opened, this function returns the value selected-
2163 by the user.-
2164-
2165 \sa setPrintRange()-
2166*/-
2167QPrinter::PrintRange QPrinter::printRange() const-
2168{-
2169 Q_D(const QPrinter);-
2170 return d->printRange;
executed 3 times by 1 test: return d->printRange;
Executed by:
  • tst_QPrinter
3
2171}-
2172-
2173-
2174/*!-
2175 \class QPrintEngine-
2176 \reentrant-
2177-
2178 \ingroup printing-
2179 \inmodule QtPrintSupport-
2180-
2181 \brief The QPrintEngine class defines an interface for how QPrinter-
2182 interacts with a given printing subsystem.-
2183-
2184 The common case when creating your own print engine is to derive from both-
2185 QPaintEngine and QPrintEngine. Various properties of a print engine are-
2186 given with property() and set with setProperty().-
2187-
2188 \sa QPaintEngine-
2189*/-
2190-
2191/*!-
2192 \enum QPrintEngine::PrintEnginePropertyKey-
2193-
2194 This enum is used to communicate properties between the print-
2195 engine and QPrinter. A property may or may not be supported by a-
2196 given print engine.-
2197-
2198 \value PPK_CollateCopies A boolean value indicating whether the-
2199 printout should be collated or not.-
2200-
2201 \value PPK_ColorMode Refers to QPrinter::ColorMode, either color or-
2202 monochrome.-
2203-
2204 \value PPK_Creator A string describing the document's creator.-
2205-
2206 \value PPK_Duplex A boolean value indicating whether both sides of-
2207 the printer paper should be used for the printout.-
2208-
2209 \value PPK_DocumentName A string describing the document name in-
2210 the spooler.-
2211-
2212 \value PPK_FontEmbedding A boolean value indicating whether data for-
2213 the document's fonts should be embedded in the data sent to the-
2214 printer.-
2215-
2216 \value PPK_FullPage A boolean describing if the printer should be-
2217 full page or not.-
2218-
2219 \value PPK_NumberOfCopies Obsolete. An integer specifying the number of-
2220 copies. Use PPK_CopyCount instead.-
2221-
2222 \value PPK_Orientation Specifies a QPrinter::Orientation value.-
2223-
2224 \value PPK_OutputFileName The output file name as a string. An-
2225 empty file name indicates that the printer should not print to a file.-
2226-
2227 \value PPK_PageOrder Specifies a QPrinter::PageOrder value.-
2228-
2229 \value PPK_PageRect A QRect specifying the page rectangle-
2230-
2231 \value PPK_PageSize Obsolete. Use PPK_PaperSize instead.-
2232-
2233 \value PPK_PaperRect A QRect specifying the paper rectangle.-
2234-
2235 \value PPK_PaperSource Specifies a QPrinter::PaperSource value.-
2236-
2237 \value PPK_PaperSources Specifies more than one QPrinter::PaperSource value.-
2238-
2239 \value PPK_PaperName A string specifying the name of the paper.-
2240-
2241 \value PPK_PaperSize Specifies a QPrinter::PaperSize value.-
2242-
2243 \value PPK_PrinterName A string specifying the name of the printer.-
2244-
2245 \value PPK_PrinterProgram A string specifying the name of the-
2246 printer program used for printing,-
2247-
2248 \value PPK_Resolution An integer describing the dots per inch for-
2249 this printer.-
2250-
2251 \value PPK_SelectionOption-
2252-
2253 \value PPK_SupportedResolutions A list of integer QVariants-
2254 describing the set of supported resolutions that the printer has.-
2255-
2256 \value PPK_WindowsPageSize An integer specifying a DM_PAPER entry-
2257 on Windows.-
2258-
2259 \value PPK_CustomPaperSize A QSizeF specifying a custom paper size-
2260 in the QPrinter::Point unit.-
2261-
2262 \value PPK_PageMargins A QList<QVariant> containing the left, top,-
2263 right and bottom margin values in the QPrinter::Point unit.-
2264-
2265 \value PPK_CopyCount An integer specifying the number of copies to print.-
2266-
2267 \value PPK_SupportsMultipleCopies A boolean value indicating whether or not-
2268 the printer supports printing multiple copies in one job.-
2269-
2270 \value PPK_QPageSize Set the page size using a QPageSize object.-
2271-
2272 \value PPK_QPageMargins Set the page margins using a QPair of QMarginsF and QPageLayout::Unit.-
2273-
2274 \value PPK_QPageLayout Set the page layout using a QPageLayout object.-
2275-
2276 \value PPK_CustomBase Basis for extension.-
2277*/-
2278-
2279/*!-
2280 \fn QPrintEngine::~QPrintEngine()-
2281-
2282 Destroys the print engine.-
2283*/-
2284-
2285/*!-
2286 \fn void QPrintEngine::setProperty(PrintEnginePropertyKey key, const QVariant &value)-
2287-
2288 Sets the print engine's property specified by \a key to the given \a value.-
2289-
2290 \sa property()-
2291*/-
2292-
2293/*!-
2294 \fn void QPrintEngine::property(PrintEnginePropertyKey key) const-
2295-
2296 Returns the print engine's property specified by \a key.-
2297-
2298 \sa setProperty()-
2299*/-
2300-
2301/*!-
2302 \fn bool QPrintEngine::newPage()-
2303-
2304 Instructs the print engine to start a new page. Returns \c true if-
2305 the printer was able to create the new page; otherwise returns \c false.-
2306*/-
2307-
2308/*!-
2309 \fn bool QPrintEngine::abort()-
2310-
2311 Instructs the print engine to abort the printing process. Returns-
2312 true if successful; otherwise returns \c false.-
2313*/-
2314-
2315/*!-
2316 \fn int QPrintEngine::metric(QPaintDevice::PaintDeviceMetric id) const-
2317-
2318 Returns the metric for the given \a id.-
2319*/-
2320-
2321/*!-
2322 \fn QPrinter::PrinterState QPrintEngine::printerState() const-
2323-
2324 Returns the current state of the printer being used by the print engine.-
2325*/-
2326-
2327QT_END_NAMESPACE-
2328-
2329#endif // QT_NO_PRINTER-
Source codeSwitch to Preprocessed file
Generated by Squish Coco Non-Commercial 4.3.0-BETA-master-30-08-2018-4cb69e9